Follow by Email

About Me

My photo
Software techie and professional seamstress.

Search This Blog

Tuesday, August 21, 2012

Headed to Novi, MI!

I had hoped to have the next installment of the collared shirt posted by now, but a couple of distractions came up in the past few weeks.

One was an emergency dye job for an Austin designer, which is now done. (Whew!)

The other is that 2 of my entries for the 2012 Threads Magazine "Innovative Lace" challenge were chosen as finalists. I am incredibly honored to be a finalist and overwhelmed that 2 were selected. The quality of work that comes out of ASDP (Association of Sewing and Design Professionals) is stellar, and the standards are very high. BUT that means I have 2 outfits that need to be modeled in the fashion show next month, both of which will be examined meticulously by some of the best sewists in the country. (I don't even like my mother to look inside my garments.) So now the old "80/20" rule kicks in, since what seemed perfectly acceptable when I only needed to photograph the outfits now seems like a complete hack job. I was looking at one item the other night and thought "what shoddy work, who the heck did this?" Oh crap, I did. And now I've decided that one garment needs to be made over completely.
I have just over a month, other items that also need attention, and this pesky thing called a "full-time job" that apparently I must show up for on a regular basis if I'd like to keep payment the mortgage and keep up my fabric habit. Oh, and dogs that expect food daily and cuddles. ;)

If you're interested in knowing more about this challenge and where the fashion show will take place, check out American Sewing Expo and Association of Sewing and Design Professionals.

Happy Sewing!
Juliette

Thursday, August 2, 2012

Why I Sew

When working with a student a few months ago who seemed to have a lot of angst about sewing, I wondered why she's even doing it. I didn't see any indication that she enjoyed a single aspect of sewing.
So that made me think about all the reasons why I sew, and here's what I came up with:

I love the challenge.
I like puzzles, and sewing is a sort of puzzle. All the pieces have to fit together. Sometimes they don't quite fit, then you have something to figure out.

The world goes away. When I'm immersed in a project, I don't think about anything else. Years ago I went to a seminar with Shakti Gawain. She talked about meditation as something that consumed your consciousness--that doing anything that you focus on so much that you don't have room in your brain for anything else is a form of meditation. That's what happens when I'm alone in my studio.

I love the process. and that there is a process.
I really do love that there is a rhythm to sewing, that there are certain steps you always do in order, starting with washing the fabric. No matter how accomplished a sewist is, they still have to cut the fabric before they sew it.

I always know when I'm done. I test software for a living, and with testing, you are never done (and wouldn't know if you ever were done.) I think this is one of the reasons that I've spent more time and energy on sewing since I got back into technology.

I love the sensual nature of (most) fabric. Fabric is sensual, as that is affects all your senses. The tactile part is pretty obvious, but I love the smell of steamed wool, the crisp snap of a high quality cotton, the swish of taffeta and the smooth coolness of silk satin. I do NOT like working with polyester. Go ahead, call me a fabric snob, I just don't like it.

I get great, well-fitting clothes out of the deal.
Of all the things you can do with your time, how many past times result in something you need anyway? Especially these days when it's next to impossible to find anything made well enough to last more than a few months, or in fabric nice enough that you'd want it to last, even if you're able to pay top dollar, sewing gives you the chance to make what you want, make it out of good quality fabric, make with higher quality, and make it fit well.


So, if you're reading this, I'd love to hear why YOU sew (or why you're thinking about it.) Please share!!


Juliette

Wednesday, August 1, 2012

The Collared Shirt, Lesson 1

The Collared Shirt, Lesson 1 -- Front Placket

I started this series back in 2010, but I'm going to start over since I never followed through the last time and I've realized that many folks need more details and more photos to understand the construction steps.

I will assume the reader has a basic understanding of sewing terms and some experience sewing clothing. Please do not hesitate to post questions, though, if I've used a term you don't understand or you need more details.
This class is all about the sewing steps of the shirt, so you'll need to pick out the size, cut out all the pieces and apply interfacing on your own.
TO SIMPLIFY THE STEPS, I'VE ASSUMED YOU HAVE SELECTED VIEW A or B (covered placket).

The pattern: Kwik Sew 2849 -- Princess seam blouse 


Why I chose this pattern:

I really don't like side seam bust darts on shirts. Princess seams just seem more refined and more flattering on a wider range of bodies.
I also like the 1/4" seam allowances which require very little trimming. This does mean you need to be accurate when cutting out and sewing since you don't have much 'wiggle room'.








What you'll need for this lesson:

Left and right front shirt pieces with interfacing fused or basted in place
Straight edge ruler
Washable marking pencil/pen/chalk
Edge Stitch Foot (#10/C/D for Bernina owners) also called 'stitch in the ditch' or edge-joining foot.
Shirt front pattern piece

Let's get started!

Mark, fold and press.
I find it's much easier to mark a line to match the cut edge to instead of a line to fold on.
 I call this a "fold-to" line.

 

RIGHT FRONT:

1. Measure the distance between the front edge and the first fold line on the pattern (1 3/8").

2. DOUBLE this measurement (2 3/4")











3. Lay the RIGHT front piece right side down.

4. Mark a line on the WRONG side of the fabric 2-3/4" from the cut edge.





5. Fold the fabric (wrong sides together) so the front edge lines up with the mark you just made.

6. Press well.














7. Measure the distance from the first fold line to the second fold line (2-1/4")


8. Double this measurement (4-1/2")











9. Mark a line on the WRONG side of the fabric 4-1/2" FROM THE FOLDED EDGE.
















 
10. Fold the fabric so the folded edge lines up with this new mark.
(You'll now have two folds == 3 layers of fabric)

11. Press well.







12. Mark 1-1/8" from the new fold. You'll use this mark in the next section.














LEFT FRONT:
1. Repeat steps 1 - 6 above.






2. Open the fold and mark 1/2" from the CUT edge.









3. Fold so the cut edge lines up with the mark.

4.  Press well.
















5. Fold first fold again and press well.








Sew the front plackets.

 
RIGHT FRONT:

1. Put the edge stitch foot on your machine.

2. Make sure the needle is the center position.

3. Line up the blade on the foot with your mark and sew the front placket.













4. Fold the facing back towards the front edge.
5. Press well.



LEFT FRONT:

1. Move the needle to the right (How far depends on your machine and sewing accuracy--you might want to practice first).

2. Line up the blade on the foot with inside fold and sew the front placket.







AND YOU ARE DONE! (with lesson 1, at least :)  )




Next up: Princess Seams